PenMount 6000 Controller Chipset
(RoHS Compliance)
PenMount 6000 touch screen
controller is the best performance
touch screen controller, it is
designed to have PnP features to
meet the new
systems trend. It is also a very
good performance of RS-232 and USB
interface on the touch screen.
PenMount 6000 has been designed for
those who may like and all-in-one
solution with 10-bit A/D converter
built-in to make the total printed
circuit board denser.
PenMount 6000 Hardware Data
 PenMount 6000 Data Sheet
|
Touch Screen: |
4, 5 , 8-wire |
|
Package: |
28-pin QFN |
|
Communications: |
RS-232 19200 / 9600 baud rate
USB Full-speed, 12Mbps |
|
Feature:
|
- High-speed pipelined
8051-compatible microcontroller
core (up to 25MIPS)
- True 10-bit ADC with
analog multiplexer
- On-chip Voltage
Reference and Temperature Sensor
- On-chip Voltage
Comparators
- 12 MHz internal
oscillator
- On-chip FLASH memory
- USB, UART interfaces
implemented in hardware |
|
Sample Rate |
160 points per second (minimal) |
|
Resolution |
1024x1024 |
|
Resistance Range : |
50~1.3K ohm |
|
Operating Voltage: |
+3.3V ~ +5V DC ± 5% |
|
Operating Temperature: |
-40
℃ to +85
℃ |
|
Storage Temperature: |
-65
℃ to +150
℃ |
|
Power Consumption |
Standby Mode :13.4 mA ; Active Mode : 24.6 mA
(VCC=+5V, Top sheet Panel
Resistance: 274Ω;
Bottom sheet
Panel Resistance: 770Ω) |
PM6000 Controller Driver Software
RS232 Interface：DOS, Windows
2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7,
WinCE 4.2/ 5.0/ 6.0,
Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3/ 6.4/ 6.5
USB Interface：Windows 2000/ XP/ XPE/
2003/ 2008/ Vista/ 7, WinCE 4.2/ 5.0/
6.0,
Linux OS (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3/ 6.4/ 6.5 (Inbox support) |
